call today for a quote

kent Industrial Steel door Sets

Personnel steel doors are the ultimate in strength and security

Do you want clear sight lines?

Do you need a cost effective solution?

Do you have different internal spaces that need separating?

KENT SECURITY DOORS

One of the most secure industrial doors solutions you can buy, our solid steel doors are perfect for both internal and external use. A perfect solution for personnel doorways in secure areas, such as plant rooms or can be used to secure an entire property if desired. Our Kent team are on hand to create bespoke quote for your requirements, wether that be a single door or a complete set.

Reduces acoustic transfer by up to 45dB*

10 Year guarantee

Made to measure

CE marked to BS EN 14351-1

Few things are stronger than a steel door

When security is all that matters, few things are stronger than a solid steel door, professionally fitted to high security buildings, key areas of your property such as plant rooms, or where you need to combine security and fire resistance. Made from Zintec coated steel these doors will not warp, twist or rot, and are available to fit most openings up to 2600 x 2950mm. 

Our Kent based experienced team will be able to recommend the best solution for your needs before providing a bespoke quote and carrying out the installation at a time that suits you.

Your perfect finish

Incredibly tough and long lasting, each door can be finished with the addition of side and over panels which are glazed, louvered or solid.

We supply and install our high quality steel doors at properties across the whole of Kent, so call us today to arrange your free and no obligation quotation!

Finishes

bespoke steel doors
Polyester Powder Coated from Standard Colour Range 
non standard steel doors
Polyester Powder Coated from Non- Standard Colour Range
pvc steel doors
PVC Laminate from Standard Range
woodgrain steel doors
Woodgrain PVC Laminate
stainless steel doors
Stainless Steel Brushed, Polished or Patterned
louvre steel doors
matching steel doors
half height steel access door
red steel doors

ina-dor

Fire Resistant Steel Doors

At our unit in Kent we create a highly cost-effective single solution offering an aesthetic design, durable construction and fire protection for up to 4 hours.

The doors, fitted in internal and external applications in a wide variety of wall constructions, are designed to protect personnel & property from the spread of flames & smoke. Our doors offer substantial benefits over comparable timber doors in strength, durability & security. The range has been tested to BS 476 Parts 20 & 22, BS EN 1634 and holds CERTIFIRE certification.

We offer three versions – each providing increased fire protection

(latched or unlatched)

ina-dor

60

UP TO
1 HOUR

 

(60 minutes)

ina-dor

120

UP TO

2 HOURs

(120 minutes)

ina-dor

240

UP TO

4 HOURs

(240 minutes)

All fire resistant doors are custom made. The maximum size varies according to fire rating as shown below for Mild Steel and 316 or 304 Stainless Steel.

tuf-dor

forced entry Resistant Steel Doors

This is a high security doorset designed to offer an enhanced level of security for a wide range of premises, from domestic or light commercial premises through to those at high risk of attack by experienced intruders.

The doors are specially constructed by our team in Kent to individual project requirements and each door has internal reinforcement designed to resist sustained attack from a wide range of tools.

We offer three versions – each providing increased security

tuf-dor

2

UP TO
3 minutes
of resistance to opportunist attempts at forced entry of protected premises using a range of mechanical tools including: screwdriver, levers, spanner, bolt cutters, claw hammer, drill, shears, etc

tuf-dor

3

UP TO

5 minutes

of resistance to determined attempts at forced entry of protected premises using a wide range of tools including: cordless tools, short axe, cold chisels, crow bar, brick bolsters, gas torch, etc.

tuf-dor

4

UP TO

10 minutes

of resistance to experienced attempts at forced entry using a wide range of tools including: high powered cordless tools, felling axe, sledgehammer, power drill, disc grinder, jigsaw, etc.

manual handling

While the TUFF-DOR2 leaves, weighing approx 100kg, can be manually handled with a minimium of 4 operatives on site, all other doorsin the range require mechanical means to distribute and install.

WALL CONSTRUCTION 

The opening must be fully formed from a material with sufficient composition strength to withstand a minimum load/fixing of 7N/nm2 (such as conrcrete or brick). Aerated concrete is NOT RECOMMENDED and hollow brick / block should only be considered if suitably backfilled with materials that will provide adequate strength (7N/nm2 ) to take the frame fixings

Is this the right door type for you?

we can answer any questions you may have or arrange a quote when you are ready 

Call us on 

01634 934935

or email

helpdesk@copperjax.co.uk

We Value your privacy

We use cookies to enhance your browsing experience, serve personalised content and analyse our traffic, by clicking “Accept All” or continuing to use this site you consent to our privacy policy